 |
|||
|---|---|---|---|
HOME
|
|||
 Turn off fluorescent light. Using a stepladder to
reach light, pull tabs to unlock frame. |
|
 If there are spring clips holding diffuser panel, remove
them by gently prying with a screwdriver. |
Slide existing diffuser panel out of frame. |
Cut the Sky-Scapes® to fit frame using a straight edge and knife. |
 With image side facing down towards the room, slide new
Sky-Scapes® diffuser into frame.
Close channel and replace screw. Replace frame springs. Attach frame to light fixture, swing into place and lock. Turn on fluorescent light and enjoy |
The frame is hinged on one side. Gently lower
frame, and remove from ceiling. 
Using a screwdriver, remove screw on one end of frame to
open channel. There are many different types of frames. Some
may have tabs that hold frames together; these tabs need
to be bent back to remove diffuser panel.
Measure existing panel and cut Sky-Scapes® panel,
adjusting for best crop of design. Trace around the
old panel onto the Sky-Scapes®.